[1]高 飞,王雨时,闻 泉,等.聚能装药破甲深度炸高不敏感性研究[J].弹箭与制导学报,2020,40(1):7-14.[doi:10.15892/j.cnki.djzdxb.2020.01.002]
 GAO Fei,WANG Yushi,WEN Quan,et al.Study on Stand-off Distance Insensitivity of Cumulative Charge Armor Penetration Depth[J].,2020,40(1):7-14.[doi:10.15892/j.cnki.djzdxb.2020.01.002]
点击复制

聚能装药破甲深度炸高不敏感性研究

参考文献/References:

[1] 郑平泰,杨涛,秦子增,等.聚能射流侵彻混凝土靶实验研究[J].弹箭与制导学报,2006,26(1):391-393.
[2] 张向荣,黄风雷.炸高对钨铜射流空气及水中侵彻的影响[J].北京理工大学学报,2011,31(3):262-264.
[3] 马海洋,龙源,何洋扬.炸高对线型聚能切割器切割深度影响的数值分析[J].火工品,2008(4):28-32.
[4] 张志彪,张连生,黄风雷,等.内部爆炸加载下变壁厚壳体膨胀破裂数值模拟[J].兵工学报,2013,34(增刊1):18-24.
[5] 陈刚,陈忠富,徐伟芳,等.45钢的J-C损伤失效参量研究[J].爆炸与冲击,2007(2):131-135.
[6] 刘同鑫,尹建平,王志军,等.低密度射流形成过程的数值分析[J].兵工学报,2014,35(增刊2):96-99.

相似文献/References:

[1]崔卫超,王志军,吴国东.不同锥角和楔角对锥形和线形聚能装药射流的影响[J].弹箭与制导学报,2007,(2):155.
 CUI Wei-chao,WANG Zhi-jun,WU Guo-dong.The Influence of Different Taper Angles and Wedge Angles on Taper Shaped Charge and Linear Shaped Charge Jet Forming[J].,2007,(1):155.
[2]崔卫超,王志军,吴国东.用ALE 法实现一种新型聚能罩结构的三维数值模拟[J].弹箭与制导学报,2007,(4):123.
 CUI Wei-chao,WANG Zhi-jun,WU Guo-dong.Using ALE Method to Carry out 3D Simulation of a New Style Shaped Charge Liner Configuration[J].,2007,(1):123.
[3]贾宪振,胡毅亭,董明荣,等.基于ANSYS/LS-DYNA模拟水下爆炸冲击波的等效质量法[J].弹箭与制导学报,2008,(3):159.
 JIA Xianzhen,HU Yiting,DONG Mingrong,et al.Equivalent Mass Method of Underwater Explosion Shock Wave Simulation Based on ANSYS/LS-DYNA[J].,2008,(1):159.
[4]唐献述,贺五一,刘 阳,等.接触爆炸作用下SFRC破坏效应研究[J].弹箭与制导学报,2008,(6):118.
 TANG Xianshu,HE Wuyi,LIU Yang,et al.Research of SFRC Destructive Effect under Contact Explosion[J].,2008,(1):118.
[5]刘晓蕾,曹红松,张会锁,等.弹丸壳体性能对聚能射流影响的数值模拟[J].弹箭与制导学报,2009,(2):136.
 LIU Xiaolei,Z HANG Huisuo,CHAI Yu.N u m e r i c al Si m u l at i o n o n t h e E f f e c t o f Sh a p e d Ch a r g e Je t wi t h D i f f e r e n t P e r f o r m a n c e o f P r o j e c t i l e Sh e ll[J].,2009,(1):136.
[6]孙传杰,卢永刚,李会敏.基于PER理论的聚能装药射流理论计算方法[J].弹箭与制导学报,2009,(4):99.
 SUN Chuanjie,LU Yonggang,LI Huimin.Model of Theoretical Calculation of Shaped Charge with Modified PˉEˉR Theory[J].,2009,(1):99.
[7]刘迎彬,王凤英,刘天生.正交法在粉末药型罩制备工艺中的应用[J].弹箭与制导学报,2009,(6):139.
 LIU Yingbin,WANG Fengying,LIU Tiansheng.Orthogonal Method Application to Powder Shaped Charge Liner Preparation[J].,2009,(1):139.
[8]李永胜,王伟力,姜涛.用于串联战斗部的环形切割器优化设计[J].弹箭与制导学报,2010,(2):97.
 LI Yongsheng,WANG Weili,JIANG Tao.Optimum Design on Annular Cutter of Tandem Warhead[J].,2010,(1):97.
[9]崔志光,刘占辰,荆献勇,等.基于LSDYNA的串联聚能战斗部前级装药结构研究[J].弹箭与制导学报,2011,(5):113.
 CUI Zhiguang,LIU Zhanchen,JING Xianyong,et al.The Study of Forward Shaped Charge Structure for Tandem Warhead Based on LSDYNA[J].,2011,(1):113.
[10]李如江,张晋红,王建波,等.偏心起爆对聚能射流形成的影响[J].弹箭与制导学报,2012,(1):85.
 LI Rujiang,ZHANG Jinhong,WANG Jianbo,et al.The Effect of Eccentric Initiation on Shaped Charge Jet Formation[J].,2012,(1):85.
[11]侯秀成,蒋建伟,陈智刚.聚能装药仿真专家系统研究[J].弹箭与制导学报,2014,34(3):87.
 HOU Xiucheng,JIANG Jianwei,CHEN Zhigang.The Study of Simulation Evaluation System on Shaped Charge[J].,2014,34(1):87.
[12]吕 进,王伟力,李永胜,等.基于环形切割器的串联战斗部隔爆材料的优选[J].弹箭与制导学报,2014,34(5):105.
 LYU Jin,WANG Weili,LI Yongsheng,et al.Optimization of Materials on Explosion-proof Body for Tandem Warhead with Front Annular Cutter[J].,2014,34(1):105.
[13]侯秀成,杨金龙,陈智刚,等.罩顶药高影响药型罩的射流转化特性[J].弹箭与制导学报,2017,37(2):67.[doi:10.15892/j.cnki.djzdxb.2017.02.002]
 HOU Xiucheng,YANG Jinlong,CHEN Zhigang,et al.Study on Conversion Characteristics of Jet of Liner Influenced by Explosive Height above Liner[J].,2017,37(1):67.[doi:10.15892/j.cnki.djzdxb.2017.02.002]

备注/Memo

收稿日期:2018-12-23 第一作者简介:高飞(1993-),男,江苏淮安人,硕士研究生,研究方向:弹药威力和引信技术。

更新日期/Last Update:

2020-02-25