[1]赵文杰,梁增友,时文超,等.高过载环境下胀环/泡沫铝复合结构缓冲吸能研究[J].弹箭与制导学报,2018,38(5):51-54.[doi:10.15892/j.cnki.djzdxb.2018.05.013]
 ZHAO Wenjie,LIANG Zengyou,SHI Wenchao,et al.Study on Buffer Energy Absorption of Expansion Ring/Foam Aluminum Composite Structure under High Overload Environment[J].,2018,38(5):51-54.[doi:10.15892/j.cnki.djzdxb.2018.05.013]
点击复制

高过载环境下胀环/泡沫铝复合结构缓冲吸能研究

参考文献/References:

[1] LAMPINEN B E, JERYAN R A. Effectiveness of polyurethane foam in energy absorbing structures:SAE Technical Paper 820494[R].[S.l.:s.n.], 1982: 26-45.
[2] REID S R, REDDY T Y, GRAY M D. Static and dynamic axial crushing of foam-filled sheet metal tubes [J]. International Journal of Mechanical Sciences, 1986, 28(5): 295-322.
[3] ABRAMOWICZ W, WIERZBICKI T. Axial crushing of foam-filled columns [J]. International Journal of Mechanical Sciences, 1988, 30(3/4): 263-271.
[4] SEITZBERGER M, RAMMERSTORFER F G, DEGISCHER H P, et al. Crushing of axially compr ess-ed steel tubes filled with aluminium foam [J].Acta Mechanica, 1997, 125(1/2/3/4): 93-105.
[5] 罗昌杰, 刘荣强, 邓宗全, 等. 泡沫铝填充薄壁金属管塑形变形缓冲器吸能特性的试验研究 [J]. 振动与冲击, 2009, 28(10): 26-30.
[6] 刘荣强, 罗昌杰, 王闯, 等. 腿式着陆器用缓冲器缓冲性能及其评价方法研究 [J]. 宇航学报, 2009, 30(3): 1179-1188.
[7] 王青春, 范子杰, 桂良进. 泡沫铝填充帽型结构轴向冲击吸能特性的试验研究 [J]. 机械工程学报, 2006, 42(4):101-106.
[8] MEGUID S A, STRANART J C, HEYEMAN J. On the layered micromechanica three-dimensional finite element modelling of foam-filled columns [J]. Finite Elements in Analysis and Design, 2004, 40(9/10): 1035-1057.
[9] HANSSEN A G, HOPPERSTAD O S, LANGSETH M, et al. Validation of constitutive models applicable to aluminium foams [J]. International Journal of Mechanical Scien-ces, 2002, 44(2): 359-406.
[10] 杨智春, 袁潘. 填充泡沫铝的多层铝管动态压溃吸能特性研究 [J]. 振动工程学报, 2012, 25(1): 12-16.
[11] 张志新, 田爱琴,车全伟,等. 高速列车车体端部吸能结构研究 [J]. 机车电传动, 2013, 43(5): 43-47.
[12] 任志远. 轴向冲击载荷作用下泡沫金属填充薄壁金属圆管吸能特性研究 [J]. 科技情报开发与经济, 2012, 22(8): 123-124.
[13] 梁志达,程涛. 泡沫铝密度对泡沫铝填充管吸能特性的影响 [J]. 轻金属学报, 2014(5): 50-54.
[14] 张红松. ANSYS14.5/LS-DYNA非线性有限元分析实例指导教程 [M].北京: 机械工业出版社, 2013.
[15] 于英华, 杨志, 梁冰. 泡沫铝压缩力学行为的有限元仿真 [J]. 计算机仿真, 2010, 27(7): 317-320.
[16] 宋岩泽,李志强,赵隆茂. 基于十四面体模型的闭孔泡沫材料动态力学行为的有限元分析 [J]. 爆炸与冲击, 2009, 29(1): 49-55.
[17] 范志庚,陈常青,万强. 泡沫铝率相关性能的有限元模拟 [J]. 爆炸与冲击, 2014, 34(6): 742-747.
[18] VESENJAK M, VEYHI C, FIEDIER T. Analysis of anisotropy and strain rateseensi-tivity of open-cell metal foam [J]. Materials Science and Engineering(A), 2012,(54)1: 105-109.
[19] BARDENHAGEN S G, BRYDON A D, GUIKEY J E. Insight into the physics of foam densification via Numberial simulation [J]. Journal of the Mechanics and Physics of Solids, 2005, 53(3): 597-617.
[20] BRYDON A D, BARDENHAGEN S G, MILLER E A, et al. Simulation of the densification of real open-celled foam microstructures [J]. Journal of the Mechanics and Physics of Solids, 2005, 53(12): 2633-2660.
[21] 白小勇, 陈成军. 球形孔洞泡沫铝力学行为的SPH分析 [J]. 固体力学学报, 2014,35(S1): 296-299.

相似文献/References:

[1]胡震东,黄 海,贾光辉.薄板超高速撞击特性数值仿真研究[J].弹箭与制导学报,2008,(2):111.
 HU Zhendong,HUANG Hai,JIA Guanghui.Numerical Simulation of Hypervelocity Impact Characteristics of Thin Aluminum Plates[J].,2008,(5):111.
[2]周建辉,孙新利,聂 虎,等.基于修正光滑粒子流体动力学的爆轰波对金属球壳的压强数值模拟[J].弹箭与制导学报,2009,(4):116.
 ZHOU Jianhui,SUN Xinli,NIE Hu,et al.Numerical Simulation of Metallic Sphereˉshell’s Pressure Caused by Detonation Wave Based on Modified SPH[J].,2009,(5):116.

备注/Memo

收稿日期:2017-10-11 基金项目:兵器装备预先研究项目; 山西省回国留学人员科研资助项目(5386046750)资助 第一作者简介:赵文杰(1991-),男,山西原平人,硕士研究生,研究方向:弹药工程、冲击动力学。

更新日期/Last Update:

2018-10-25